The Impro 125 kHz Antenna Readers are compact, 125 kHz Tag Readers.
The Antenna Readers are compatible with the SupaGate, IXP20, IXP220 or ImproNet Access Control Systems.
The Antenna Readers include a single bi-coloured Red or Green Status LED. Selected models also include a single tone Buzzer. You can adjust the Buzzer volume to any one of these four levels (off, low, medium and high). You can set the functions of the Buzzer and Status LED to suit the needs of your application.
Selected models feature a 12-button numeric or alphanumeric (model dependent) Keypad. You may use the Keypad for Personal Access Code (PAC), PIN-Code or Reason Code entry.
Intended for indoor or outdoor use, selected models feature robust metal housings and fully potted electronic components. The potting compound prevents vandals tampering with the electronic components.
Datasheet
The Impro 125 kHz Antenna Readers are compact, 125 kHz Tag Readers.
The Antenna Readers are compatible with the SupaGate, IXP20, IXP220 or ImproNet Access Control Systems.
The Antenna Readers include a single bi-coloured Red or Green Status LED. Selected models also include a single tone Buzzer. You can adjust the Buzzer volume to any one of these four levels (off, low, medium and high). You can set the functions of the Buzzer and Status LED to suit the needs of your application.
Selected models feature a 12-button numeric or alphanumeric (model dependent) Keypad. You may use the Keypad for Personal Access Code (PAC), PIN-Code or Reason Code entry.
Intended for indoor or outdoor use, selected models feature robust metal housings and fully potted electronic components. The potting compound prevents vandals tampering with the electronic components.
Datasheet
The Impro Multi-discipline Readers are compact and robust Passive Proximity Readers.
New technology allows the Multi-discipline Readers to read both 125 kHz and 13.56 MHz frequency Tags. These Readers fit seamlessly into new or existing applications allowing you to upgrade Tag technology without replacing existing Tags.
The design of the Multi-discipline Reader allows you to use them with a variety of Terminals and Controllers, within third-party or Impro Access Control Systems. When used with the IXP220 Controller, IXP20 Controller or the Impro iTRT, these Readers use AES 128-bit Encryption with a Diffie Hellman key exchange thus ensuring secure communications on the Wiegand Bus.
You can use the Multi-discipline Readers in both indoor and protected outdoor environments.
The Multi-discipline Keypad Reader offers a 12-button Keypad allowing PIN-code entry. All models include a single tone, single volume Buzzer and a single tri-coloured Red, Green or Amber Status LED. You can control the functions of the Buzzer and Status LED to suit the needs of your application.
Datasheet
Impro provide a wide range of high-quality RFID Tags for use with their range of access control systems. These Tags are manufactured to international standards, providing long and trouble-free operation in the field.
The Impro ISO Print Quality Credit Card Tag, is manufactured using fully automated direct bonding technology, resulting in a high quality, first class card, with an excellent surface for superior printing results.
The card has dimensions and tolerances that comply with the ISO 7816-1 type ID-1I standard. The cards are subjected to comprehensive qualification testing exceeding ISO requirements.
This is a flexible ISO standard credit card Tag designed to suit most 125 kHz proximity applications.
125KHz Cards & Tags Datasheet
Multi-Technology ISO Cards Datasheet
Nedap AVI is the leading expert in superior long range identification of vehicles and drivers.
They design, develop and sell solutions related to vehicle identification, driver identification, vehicle detection and handsfree building access.
Their readers, sensors and controllers are installed all over the world in a variety of applications. These innovative systems guarantee the speedy flow of vehicles and people at airports, parking facilities, industrial estates, taxi stands, in office buildings and numerous other installations.
Their extensive product range caterers for the most complex user requirement, from the UPass Access to the Transit Standard range.
Datasheet
The Impro (ECII) Ethernet Controller is a fully Ethernet compatible Controller for use in the IXP400i Access Control System.
The Controller boasts both an RS485 Controller Port (Port 1) and an Ethernet Port allowing use of either. When connected to the Ethernet Port the Controller offers communication speeds and capacity not yet seen in similar systems.
The Controller comes standard with an RS485 Terminal Port (Port 2) (able to support up to 32 full Anti-passback doors), on-board Diagnostic LEDs and a System Backup Battery. The Battery allows between 4 to 6 hours of uninterrupted power.
The Impro (ECII) Ethernet Controller is the next generation of Ethernet hardware promoting quick and easy installation across a LAN or WAN with bandwidth friendly communication protocol.
Datasheet
New technology allows the Multi-discipline Readers to read both 125 kHz and 13.56 MHz frequency Tags. These Readers fit seamlessly into new or existing applications allowing you to upgrade Tag technology without replacing existing Tags.
The design of the Multi-discipline Reader allows you to use them with a variety of Terminals and Controllers, within third-party or Impro Access Control Systems. When used with the IXP220 Controller, IXP20 Controller or the Impro iTRT, these Readers use AES 128-bit Encryption with a Diffie Hellman key exchange thus ensuring secure communications on the Wiegand Bus.
You can use the Multi-discipline Readers in both indoor and protected outdoor environments.
The Multi-discipline Keypad Reader offers a 12-button Keypad allowing PIN-code entry. All models include a single tone, single volume Buzzer and a single tri-coloured Red, Green or Amber Status LED. You can control the functions of the Buzzer and Status LED to suit the needs of your application.
DatasheetImpro provide a wide range of high-quality RFID Tags for use with their range of access control systems. These Tags are manufactured to international standards, providing long and trouble-free operation in the field.
The Impro ISO Print Quality Credit Card Tag, is manufactured using fully automated direct bonding technology, resulting in a high quality, first class card, with an excellent surface for superior printing results.
The card has dimensions and tolerances that comply with the ISO 7816-1 type ID-1I standard. The cards are subjected to comprehensive qualification testing exceeding ISO requirements.
This is a flexible ISO standard credit card Tag designed to suit most 125 kHz proximity applications.
125KHz Cards & Tags Datasheet Multi-Technology ISO Cards DatasheetNedap AVI is the leading expert in superior long range identification of vehicles and drivers.
They design, develop and sell solutions related to vehicle identification, driver identification, vehicle detection and handsfree building access.
Their readers, sensors and controllers are installed all over the world in a variety of applications. These innovative systems guarantee the speedy flow of vehicles and people at airports, parking facilities, industrial estates, taxi stands, in office buildings and numerous other installations.
Their extensive product range caterers for the most complex user requirement, from the UPass Access to the Transit Standard range.
DatasheetThe Impro (ECII) Ethernet Controller is a fully Ethernet compatible Controller for use in the IXP400i Access Control System.
The Controller boasts both an RS485 Controller Port (Port 1) and an Ethernet Port allowing use of either. When connected to the Ethernet Port the Controller offers communication speeds and capacity not yet seen in similar systems.
The Controller comes standard with an RS485 Terminal Port (Port 2) (able to support up to 32 full Anti-passback doors), on-board Diagnostic LEDs and a System Backup Battery. The Battery allows between 4 to 6 hours of uninterrupted power.
The Impro (ECII) Ethernet Controller is the next generation of Ethernet hardware promoting quick and easy installation across a LAN or WAN with bandwidth friendly communication protocol.
Datasheet